How to Buy an eSIM
First, select an eSIM data package for the country where you are traveling, or currently located. You can find our full selection of eSIM cards on Roamight.
After purchasing an eSIM, you will usually receive a QR Code via email within 2 minutes.
Before you begin installation with a QR code, there are a few important points to be aware of:
You must have the QR code on another screen or device to scan it with your phone camera.
Make sure you have a stable internet connection throughout the process.
Please note that the QR code can only be scanned once.
Do not remove the eSIM from your device as you will not be able to use it again.
How to Activate an eSIM
Activating your eSIM is the final step towards seamless connectivity:
Access Settings
Cellular and select your Secondary eSIM.
Enable Turn On This Line and Data Roaming.
Your device will automatically connect to a network compatible at your destination.
Connecting to the Internet
After successfully activating your eSIM, your device will begin searching for a signal immediately. In most cases, a data connection will be established immediately, and you will see 4G/LTE/5G in the signal status. This means you are connected and ready to go!
In rare cases, it may take up to 15 minutes for a data connection to be established. Please be patient, as there are many data carriers and environmental factors that can affect the activation time.
If you are unable to connect to the internet after 15 minutes, please see our eSIM Connection Troubleshooting Guide.
Should I turn off my primary cellular plan while using Roamight eSIM plan?
If you have a Primary SIM, roaming on that should be "OFF" while you're using Roamight eSIM.